顯示具有 LED T8光管 標籤的文章。 顯示所有文章
顯示具有 LED T8光管 標籤的文章。 顯示所有文章

應急照明的電池套件



你好!女士們,先生們,歡迎訪問我們的頁面。我們已經介紹了照明功能中的更多行業。今天我們要宣布,我們公司提供了用於應急照明的電池套件。

我們可以為LED T8和LED T5產品提供應急照明解決方案。

"結合可調光和非可調光LED驅動器,可保持運行狀態。"


應急照明電池套件中的關鍵因素:

  • 應急燈可以通過電池供電或充電。
  • LED燈在明亮模式下放電時間為2/3小時。某些應急燈會以正確的方式打開,以防止人們迷失在樓梯上。
  • 應確保您的產品安全,並應完全符合適用的安全要求。
  • 樓梯燈需要每三個月檢查一次,並應進行必要的更換。
  • 如果您還提供照明設備的安裝服務,則應找到註冊的電氣承包商(REC),並僱用註冊的電氣工人(REW)進行工作。




#LED燈管,#電池套件


Topco Lighting
enquiry@topcolighting.com
http://www.topcolighting.com









Battery kit for emergency lighting


Hello! Ladies and Gentlemen welcome to our pages. We have been introduced to more industries in the lighting function. Today we would like to announce our company offers a battery kit for emergency lighting.
We can offer emergency lighting solutions for LED T8 and LED T5 products.
combined with dimmable and non-dimmable LED Drivers for maintained operation.
The key factor in battery kit for emergency lighting:
  • Emergency lights are either battery operated or rechargeable.
  • Discharge duration 2/3 hours on bright mode for LED tube. Some emergency lights are switched on to lead in the proper way and people don’t tend to get lost in stairs.
  • Should ensure that your products are safe and shall fully comply with the applicable safety requirements.
  • Staircase lights need to be checked every three months and necessary replacements should make to them.
  • If you also provide installation service for the luminaire, you should find a registered electrical contractor (REC), and employ a registered electrical worker (REW) to carry out the work.




Topco Lighting

#LED Tubes, #battery kit

enquiry@topcolighting.com
http://www.topcolighting.com







回覆讀者的信:我們如何選擇LED筒燈連接調光控制器?


為避免源頭出現故障調光,您可以選擇可調光LED筒燈,驅動器必須設計為允許使用控制面板進行調光。


請注意,如果您發現其中一個不可調光的LED筒燈並嘗試調暗,則會導致燈光失效。 我們的一些商業照明項目(LED公礦燈,LED泛光燈,LED筒燈,LED T8燈管,LED吊線燈,LED防水燈帶)大多數都採用0-10V調光系統。 通用120V-277V輸入提供0-10V調光。


Topco lighting





Response to a reader’s letter:How can we choose LED Downlight to connect with dimmer controls?

To avoid fail dimmer at the source,  you would select dimmable LED Downlight and the driver must to design allow dimming with your control panel.
Please note that if you find one of non-dimmable LED Downlight and try to dim, it would cause the lights to fail. Some of our commercial lighting projects (highbay, flood light, Downlight, T8 tube, pendant linear light, LED strips) most work with a 0-10V dimming system. 0-10V dimming is available in universal 120V-277V input.
Topco lighting

最好的鋁製散熱器,可以減少LED的過熱和過壓。

LED是最好的光源。其中包括LED中的一些半導體材料。

但當交叉點溫度超過185華氏度時,LED會立即損耗。適當規劃的LED電路需要兩個重要亮點才能有效:解決過熱保險和​​過壓保護方案。

當LED在嚴格控制的電壓下工作時,無論它是否產生一些溫暖。必須以保證交叉溫度不會超過的速度從LED小工具中排出這種溫暖。將LED小工具放在“散熱器”上的最理想方法,該散熱器能夠將LED產生的溫暖物移動到一個可以傳播到空氣或一些包圍溫暖坑的地方。 LED沒有浪費時間來處理這個問題,因為它們所使用的印刷電路負載大部分足夠大,可以作為適當的散熱器填充。

高質量的鋁壓鑄金屬可以製造更多的多面平衡,有助於更快地分散溫度。它提供了體積的表面區域,可以更快地冷卻金屬。



THE BEST ALUMINUM HEAT SINK CAN REDUCE LEDS OVER-HEATING AND OVER-VOLTAGE


LEDs are the best lighting source accessible. Which included some slivers of semiconductor material in LEDs.
LEDs, as well as promptly fall flat when the intersection temperature surpasses 185 degrees Fahrenheit. Appropriately planned LED circuits require two essential highlights to be effective: insurance from over-warming and security from over-voltage.
When LEDs is worked at a painstakingly controlled voltage, regardless it creates some warmth. This warmth must be expelled from the LED gadget at a rate that guarantees the intersection temperature does not surpass as far as possible. The most ideal approach to put the LED gadget on a “heat sink" that has the ability to douse up the produced warm from the LED and move it to a place where it can be transmitted into the air or some encompassing warmth pit. Early age LEDs did not waste time with this issue since the printed circuit load up they were utilized on was for the most part sufficiently extensive to fill as an adequate heat sink.
High quality of aluminum die cast metal can make more multifaceted balances that assistance to disperse warm speedier. It gives a surface territory to volume which cools the metal quicker.

TOPCO Lighting

LED燈管照明的好處



LED燈管照明的好處

應急T8燈管
延長電池壽命的電路會在充電電池模式下內置電源故障時自動點亮。

安全材料
LED產品主要使用長矽襯底,鋁,聚碳酸酯。 LED管沒有致命的氣體或化學物質,因此可以作為常規廢物處理。

LED沒有汞
由於存在汞而產生的熒光燈是非常危險和有毒的,這對我們的健康和環境危害很大。

產品質量保證
比較熒光壽命10,000小時和大部分維護成本。 LED燈管的優點是能夠提供高能效,低功耗和超過50000小時的使用壽命,使其比熒光燈更亮。

拆下電子鎮流器
LED燈管可以移除或縮短電感鎮流器。 易於安裝的方法與熒光燈具進行比較。

請訪問www.topcolighting.com了解最新的LED照明解決方案。




Benefits of LED Tube Lighting

Emergency T8 light tubes
Circuit for extended battery life automatic light up when power failure built in recharge battery mode.

Safety material
LEDs products mostly used of a long silicon substrate, aluminum, Polycarbonate. The LED tubes have no lethal gases or chemicals henceforth can be disposed as regular waste.

No mercury was found in LED
Fluorescent lights due to the presence of mercury, which is very dangerous and toxic are major our health and environmental hazards.

Product warranty
To compare with fluorescent light lifetime 10,000 hours and most of maintenance costs. The benefits of LED tubes can provide energy efficiency, low power consumption and over 50,000 hours lifetime to brighter light than fluorescent light.

Remove electronic ballast
Led tubes can remove or short off the magnetic ballast. Easy installing method to compare with fluorescent fixture.

Via Topco Lighting to find out the latest LED lighting solutions


精選文章

最好的鋁製散熱器,可以減少LED的過熱和過壓。

LED是最好的光源。其中包括LED中的一些半導體材料。 但當交叉點溫度超過185華氏度時,LED會立即損耗。適當規劃的LED電路需要兩個重要亮點才能有效:解決過熱保險和​​過壓保護方案。 當LED在嚴格控制的電壓下工作時,無論它是否產生一些溫暖。必須以保證交叉溫度不會超過...