回覆讀者的信：我們如何選擇LED筒燈連接調光控制器？

為避免源頭出現故障調光，您可以選擇可調光LED筒燈，驅動器必須設計為允許使用控制面板進行調光。

請注意，如果您發現其中一個不可調光的LED筒燈並嘗試調暗，則會導致燈光失效。 我們的一些商業照明項目（LED公礦燈，LED泛光燈，LED筒燈，LED T8燈管，LED吊線燈，LED防水燈帶）大多數都採用0-10V調光系統。 通用120V-277V輸入提供0-10V調光。

Topco lighting

Response to a reader’s letter：How can we choose LED Downlight to connect with dimmer controls?

To avoid fail dimmer at the source,  you would select dimmable LED Downlight and the driver must to design allow dimming with your control panel.

Please note that if you find one of non-dimmable LED Downlight and try to dim, it would cause the lights to fail. Some of our commercial lighting projects (highbay, flood light, Downlight, T8 tube, pendant linear light, LED strips) most work with a 0-10V dimming system. 0-10V dimming is available in universal 120V-277V input.

Topco lighting

最好的鋁製散熱器，可以減少LED的過熱和過壓。

LED是最好的光源。其中包括LED中的一些半導體材料。

但當交叉點溫度超過185華氏度時，LED會立即損耗。適當規劃的LED電路需要兩個重要亮點才能有效：解決過熱保險和​​過壓保護方案。

當LED在嚴格控制的電壓下工作時，無論它是否產生一些溫暖。必須以保證交叉溫度不會超過的速度從LED小工具中排出這種溫暖。將LED小工具放在“散熱器”上的最理想方法，該散熱器能夠將LED產生的溫暖物移動到一個可以傳播到空氣或一些包圍溫暖坑的地方。 LED沒有浪費時間來處理這個問題，因為它們所使用的印刷電路負載大部分足夠大，可以作為適當的散熱器填充。

高質量的鋁壓鑄金屬可以製造更多的多面平衡，有助於更快地分散溫度。它提供了體積的表面區域，可以更快地冷卻金屬。

THE BEST ALUMINUM HEAT SINK CAN REDUCE LEDS OVER-HEATING AND OVER-VOLTAGE

LEDs are the best lighting source accessible. Which included some slivers of semiconductor material in LEDs.

LEDs, as well as promptly fall flat when the intersection temperature surpasses 185 degrees Fahrenheit. Appropriately planned LED circuits require two essential highlights to be effective: insurance from over-warming and security from over-voltage.

When LEDs is worked at a painstakingly controlled voltage, regardless it creates some warmth. This warmth must be expelled from the LED gadget at a rate that guarantees the intersection temperature does not surpass as far as possible. The most ideal approach to put the LED gadget on a “heat sink" that has the ability to douse up the produced warm from the LED and move it to a place where it can be transmitted into the air or some encompassing warmth pit. Early age LEDs did not waste time with this issue since the printed circuit load up they were utilized on was for the most part sufficiently extensive to fill as an adequate heat sink.

High quality of aluminum die cast metal can make more multifaceted balances that assistance to disperse warm speedier. It gives a surface territory to volume which cools the metal quicker.

TOPCO Lighting